Granting blanket root to all programs on an android phone sure that’s a risk; but who the fuck does that on any system…
From memory individual apps would be able to request root which could be denied, approved once, approved always or ignored.
Really depends on what you want out of the system, what you can spend and how much time you want to spend on it.
My old z390 itx system has a 16x PCIE to 4x m.2 card - leveraging an m.2 to 5x SATA adaptor with the built in SATA adaptors has given it plenty of space.
Considering I can grab m.2 to 6 SATA adaptors and fill the remainder of the slots that’s a decent chunk of drives from a single PCIE x16 slot.
Software is another kettle of fish and a good way to timesink, I’d rather not give too much of my personal experience as there are so many ways to skin that cat.
Unsure if the issue is fixed upstream in the kernel however there are a few topics going in depth about this issue with some reported fixes / workarounds.
https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3182
https://forum.endeavouros.com/t/crackling-microphone/22173
https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1569#note_1102615
Good luck with the issue, hopefully one of these links fixes that problem for you 🍻
Pipewire works fine on my Intel 5960x, Intel N3700, Intel 9900k, Intel 9700, AMD 4800HS and even my Intel ES Erying system. No pops or crackles from any inputs or outputs.
I’ve not tried with a dedicated sound card, just the onboard on all these systems.
Running KDE on one system along with Hyprland on another two with the remainder as headless systems.
You sure this issue isn’t somehow related to your hardware or something else?
I use Schizofox, perhaps some of those tweaks assist. I’ve got a static IP at home too, maybe just lucky?
Clear cookies and site data (Firefox) then refresh the page.
You can continue to download until you hit the limit again, rinse and repeat.
Works great and has been for some time on my P7P.
Ensure you’ve allowed background usage and turn off manage app if unused.
Keep the notification on and allow notifications.
For Plex just unpin the default channels, and leave your local media libraries pinned.
Creating a browser from scratch is a monumental task, ladybird is such a project which has been in progress since ~2022, and will probably take another couple before it’s at beta. Optimistic release is 2028, or ~6 years of development.
I’ve moved to schizofox (NixOS) but there are plenty of other forks available which remove telemetry and other default behaviours from Firefox.
Chromium forks are another alternative however due to chromiums dominance in the browser space I’m reluctant to shoutout any forks.
Yeah man what an arsehole giving away free things, spending time making free things for everyone to use for free.
If he wants to keep his code private until he’s ready to release it - that’s somewhat up to him. The repo is a step in the right direction, just give it some time.
Looking through the git repo the ignore is lopping off quite a number of files too (server) however I’m not sure how much of those are things like secrets, cache, other scripts and so forth.
Yeah I raw dogged ABS-GF and the quality was horrible compared to my next week’s prints with a dryer.
I’ve not had too many issues using old / straight from the bag PETG but it was night and day with ABS.
Oh but it’s like anything in life, you can skirt the brim and get a taste of what’s on the outside of the bowl, or you can run down the sides and take a splash with the real meat and potatoes.
Nothing wrong with not asking the how or the why, or the who and the what however I find that attitude has led us to being between three and twenty five foot tall, made of a hairy, oily goo wrapped in a tee shirt.
Oh, I’m more having a jab at Bambu attempting to raise their walled garden via their latest firmware.
Yeah it’s the way of the world, I’m very glad my printer has a community supported Klipper firmware - and am glad to see some people working on this for the folks in the Bambu camp too.
Sounds like something Bambu would do, considering their recent drama. Really are trying to be the iPhone of the 3D printer market.
I’ve only been printing since Novemberish and hated how locked-down the Marlin firmware was on my V3 SE (compared to Klipper), I upgraded my nozzle and needed to flash the firmware for temps up-to 300c so it was use a modded Marlin or flash Klipper.
It’s an option in Klipper however unsure if it’s available for Marlin based printers. My V3 SE didn’t have it from memory - now running Klipper both bed and hotend tuned finding the temps don’t bounce as much.
For your issue not sure if a tune in this regard would resolve your issues, strange issue to be seeing.
Intel made some massive mistakes with their post 14nm nodes, they overextended and fell on their own sword.
Admittedly what Intel were aiming for with their “10nm” node had higher density than tsmc’s “7nm” (from memory), considering the timeframe that would have been another massive leap for Intel; and if they had pulled it off AMD would be struggling like the bulldozer days.
22nm to 14nm Intel were on fire, almost seemed untouchable for quite some time. X99 was (in my eyes) the biggest leap in the right direction and probably their best consumer platform ever released. Huge cache, moar cores, pcie lanes for days and a refresh on their latest node (6950x).
Computers is a fucking hot song, the drums are on point, the buildup and energy screeching about vr porn, the singularity and black holes until it all halts for a sax solo. Don’t forget 3G.
You lot in the states need more of this and less of diddly tromp.
Really depends on what you want to do.
Same as any Linux system you don’t want applications to have root access all the time. However if I want to remove a system file or modify something that a normal user isn’t able to, something is going to require higher privileges than the standard user account has.